machined on the lathe

См. также в других словарях:

• Lathe — A lathe (pronEng|ˈleɪð) is a machine tool which spins a block of material to perform various operations such as cutting, sanding, knurling, drilling, or deformation with tools that are applied to the workpiece to create an object which has… …   Wikipedia

• Lathe (metal) — Center lathe with DRO and chuck guard. Size is 460 mm swing x 1000 mm between centers A metal lathe or metalworking lathe is a large class of lathes designed for precisely machining relatively hard materials. They were originally designed to… …   Wikipedia

• Lathe center — Dead center mounted in the spindle of a lathe and being used to support a workpiece being driven by a carrier setup A lathe center, often shortened to center, is a tool that has been ground to a point as to accurately position a workpiece about… …   Wikipedia

• Lathe faceplate — A lathe faceplate is the basic workholding accessory for a wood or metal turning lathe. It is a circular metal (usually cast iron) plate which fixes to the end of the lathe spindle. The workpiece is then clamped to the faceplate, typically using… …   Wikipedia

• Lathe carrier — A lathe carrier (or lathe dog) is a device that clamps around the workpiece and allows the rotary motion of the machine s spindle to be transmitted to the workpiece.A carrier is most often nn used when turning between centers on a lathe, but it… …   Wikipedia

• Turret lathe — Hartness 3x36 flat turret lathe with cross sliding head, equipped for bar work, 1910.[1] The turret lathe is a form of metalworking lathe that is used for repetitive production of duplicate parts, which by the nature of their cutting process are… …   Wikipedia

• Portsmouth Block Mills — The Portsmouth Block Mills form part of the Portsmouth Dockyard at Portsmouth, Hampshire, England, and were built during the Napoleonic Wars to supply the British Royal Navy with pulley blocks. They started the age of mass production using all… …   Wikipedia

• machine tool — machine tooled, adj. a power operated machine, as a lathe, used for general cutting and shaping of metal and other substances. [1860 65] * * * Stationary, power driven machine used to cut, shape, or form materials such as metal and wood. Machine… …   Universalium

• Chuck (engineering) — Self centering three jaw chuck and key with one jaw removed and inverted showing the teeth that engage in the scroll plate. The scroll plate is rotated within the chuck body by the key, the scroll engages the teeth on the underside of the jaws… …   Wikipedia

• Screw machine — A screw machine is a metalworking machine used in the high volume manufacture of turned components.In operation, a screw machine is similar to a lathe. Essentially a screw machine is an automated turret lathe.Screw machines have been replaced by… …   Wikipedia

• Mandrel — For other uses, see Mandrel (disambiguation). Not to be confused with Mandrill (the primate species). Old shop made mandrel for turning hollow objects on an engine lathe …   Wikipedia